PROJECT 4X4 STAMPEDE

PROJECT 4X4 STAMPEDE

Have you ever looked at your Traxxas Stampede and thought about how cool it would be to make it a 4X4 dual motor racing truck, but never knew where to start?  A complete parts list of all the parts I used is below.  The truck is not for sale.  This page is designed to give you ideas for your stampede.  For the money I spent I could of had a nice E-maxx or T-maxx, but you can't buy a 4X4 Stampede in kit form or RTR.  That's what makes this truck truely unique.   The truck sits higher, wider and longer than a stock Stampede thanks to the Xtreme Racing 4x4 carbon fiber chassis.

ADRC RACING.

ADRC RACING

4X4 Stampede parts list

4X4 Stampede parts list

TRX Stampede kit.................................part # 3610 or 3601

TRX Screw set......................................part # 1845

TRX Rod ends......................................part # 2742

TRX Gearbox halves L&R.....................part # 3691

TRX Shock tower (rear)........................part # 3638

TRX Body mounts F&R........................part # 3614

TRX Chrome wheels front two..............part # 3637 ......X2

TRX Skid plates...................................part # 3623

TRX 84 tooth Spur gear.......................part # 4684 ......X2

TRX Slipper clutch set.........................part # 4615

TRX top shaft.......................................part # 1993

TRX Top drive gear..............................part # 3195

TRX Main dif gear................................part # 2381

TRX idler gear......................................part # 1996

TRX plant gears/sun gears...................part # 2382

Losi 15 tooth pinion gear......................part # tl-4115...X2

MIP Shiny CVD kit................................part # 1219......X2

MIP CVD axle for RS4 MT front.............part # 1071......X2

Racers edge purple servo saver............part # 1031-5p

Trinity Speed gems 17 turn duble.........part # 9254......X2

Cirrus cs-80 128 OZ of torque servo......part # 444178

Hot bodies two purple shocks...............part # 25000....X2

RPM Purple gear cover.........................part # 80408....X2

ESP Side nerf bars...............................part # ESPC0054

ESP Wheelie bar..................................part # ESPC0052

HPI Suspension arm set MT.................part # A456......x2

HPI Up right set MT..............................part # A460

Powerline purple rear hubs...................part # TT5007

Rogue Element license plate kit............part # LPK-FL

IMEX 2.2 G Hawg tires..........................part # 7591.....X2

Pro-line Chevy Silverado body..............part # 3088

Pro-line new Chevy Silverado body.......part # 3152

Full sealed bearing set.........................part # NA

Xtreme Racing 4x4 chassis...................part # 1501

Two feet: purple & black silcone wire....part # NA

Novak Super Rooster ESC....................part # 1860

The camber and steering links I made from aluminum rod I got from The Home Depot and Traxxas rod ends.  The body mount lift kit I made from aluminum stock can also be seen in the PIC.

The ESP wheelie bar works very well.  I had it on my Stampede when it was two wheel drive and on a smooth surface with just the right amount of throttle it will wheelie forever.

Even when buried in the sand the IMEX G Hawg tires proved to be a good all around tire.  They will pull the truck out of anything.  Light weight with foam inserts makes them great for pavement pounding too.

The Traxxas gearbox in the front will need to be ground down with a Dremel tool, to fit the RS4 MT suspension arms.  Other than that there are no modifications made to the parts I used on this truck.

These shots where taken with a six cell battery pack and, as you can see it's very fast.  The Novak Super Rooster can handle up to ten cells with dual motors, with ten cells it would be as fast as any E-maxx or T-maxx.

You will not need all of the parts I used to make your Stampede 4X4, but all of these parts will work with this set up.

The Rogue Element license plate kit is made from machined aluminum and comes with a full set of letters and numbers decal sheet to personalize your plate.

adrc racing

A site for custom painted R/C bodies

adrc racing

The underneath of the chassis looks very trick with carbon fiber, chrome and aluminum showing.

www.adrcracing.com